Ridewell 7423

Ridewell Suspension stopped manufacturing the Model 7423 Height & Leveling Control Valve around 2006. This Valve described as Mega-Duty was used on Trucks/Tractors, Trailers, Buses, Motor Homes, Air Cabs and Air Seats.

The Valve was available in many configurations and under numerous Part Numbers. It also came in an Air Dump Valve version, where a Dump Valve was mounted to the top of the Height Control Valve.

This Valve is recognizable with a black plastic body and distinctive blue exhaust cap on the bottom and the Ridewell name and numbers 7423 molded into the top of the valve near the air supply port.

Depending on your particular application there are several good replacements that we can recommend for you below. Please note that with any replacement some changes may be required during installation.

If you would like more information, PLEASE CALL US to discuss your particular needs.

K861001

If air consumption is not a concern and you have 3/8" air lines this is a good economical option. It comes with 3/8" PTC fittings and may require re-routing the air lines.

K861002

If you are replacing a "7423 with a Pressure Dump" this is a good choice. It comes with 3/8" PTC fittings and may require re-routing the air lines.

K861003

A good choice for Buses and RVs or other applications where air consumption may be a concern. This is a Low Flow Valve and uses 1/4" Tube PTC fittings and may require re-routing the air lines.

K861007

If you have a "7423 with a Zero Pressure Dump" such as a Trailer that uses automatic dump then this is a good choice. It comes with 3/8" PTC fittings and may require re-routing the air lines.

K864006

This may be the easiest replacement to install as it is very similar to the 7423 though overall it is a little larger than the original Valve, but has the same porting and mounting configuration. It comes with 1/4" NPT Fittings and the 1/4" round rod Lever Arm similar to the 7423. This Kit also includes an Adjustable Vertical Linkage Kit.